AWC-2073.is a high performance coating designed for excellent chemical corrosion resistance And. High temperatures resistance
AWC-2073 Offers excellent adhesion to steel ideal for tanks pipe work containment.
AWC-2073 Now a Metallic Stainless Putty That Fills, Bonds, Protects & Repairs.

1. Cures at Room Temp. To Form.
   Machinable Composite
2. Maintains High Bond Strength
   at High Temperatures
3. Excellent Chemical, Corrosion.

Shock Resistance Stainless Steel, One Component Putty that
fills, bonds, protects and repairs.
It is easy to use. Just re-mix and apply. Hardening starts in
just 60 minutes. User Friendly! Does not contain flammable solvents . No
harsh odors, no out gassing.
AWC # 2073. Offers excellent adhesion, corrosion and chemical resistance.
Can be machined, tapped or drilled and will not run or sag
while applying. Applications Include: repairing pumps, valves, fittings,
and equipment; rebuilding worn housings, shafts and tank
Linings; filling cracks, holes, voids, blowholes.
AWC#2073. is commonly used for the production of motors, assemblies,
Instrumentation, laboratory equipment, automotive parts, machines, etc.
AWC.#2073 is the Ideal Choice For Any High temperature Application
Requiring High Bond Strength and up to 2000°F.

Before mixing the components the work piece should be prepared in accordance with
the surface reparation. always use clean tools for removal of the components to avoid
a reaction within the lines .
.Depending on the application consistency the mixture (the AWC2073) can be applied with
a spatula or brush.
If a second coating is required a surface preparation must be done again.

Avoid contact with skin and eyes in case of skin contat use water and soap for cleaning.
AWC-2073 in to the eyes rinse out thoroughly with water.

Both components can be for at least 6 months. if kept at temperatures up to max-23°C.
In the long term The materials do not loose their high quality performance after repeated openings
of the containers. Should be stored in a cool and dry place.

The product information and instructions provided in this leaflet were prepared to the best of our knowledge and serve information purposes only .We recommend that appropriate tests are carried out prior to application in order to ensure that the products and methods fulfil the purpose desired by the user .In this procedure the given data may serve as a basis .Application and processing of the products lie outside our possible control and are there fore the sole responsibility of user.

Max. Use Temp	2000°F
Components	1
Pot Life	60 minutes
Cure	R. T. 24 hours
Viscosity	Paste
Density	180 #/ ft.3
Compressive Strength	4600 psi
Bond Strength	at 200°F 600 psi
	at 1200°F 1400 psi
Thermal Expansion	9 x 10-6/°F
Application consistency	Pasty or brush able.